Query Error List; User Request Event; Operation Complete Event - Xantrex XDC 10-600 Operating Manual

Query Error List

An error number in the range [-499, -400] indicates that the output queue control of
the instrument has detected a problem with the message exchange protocol described
in IEEE 488.2, chapter 6. The occurrence of any error in this class causes the query
error bit (bit 2) in the Event Status Register to be set.
Table C.4 Query Error List
Error
code
-400
-410

User Request Event

An error/event in the range [-699, -600] is used when the instrument wishes to report
a 488.2 user request event. This event also sets the user request bit (bit 6) of the
Standard Event Status Register.
Table C.5 User Request Event
Error
code
-600

Operation Complete Event

An error/event in the range [-899, -800] is used when the instrument wishes to report
a 488.2 operation complete event. This event occurs when an instrument's
synchronization protocol, having been enabled by an *OPC command, completes all
selected pending operations. This event also sets the operation complete bit (bit 0) of
the Standard Event Status Register.
Table C.6 Operation Complete Event
Error
code
-800
Release 3.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Error Message Description
Query Error
This is the generic query error for the power supply, used only when the other
types of errors do not apply.
Query INTERRUPTED
Generated when a new command was received before it could finish the query.
Error Message Description
User request
Error Message Description
Operation complete
Error Messages
Query Error List
219