Table 1.1 Front Panel Functions - Xantrex XDC 10-600 Operating Manual

About The XDC Power Supply
Front Panel

Table 1.1 Front Panel Functions

Key Functions
Voltage Setpoint Enter voltage
Current Setpoint Enter current
Output ON/OFF Toggle
Local/Remote Mode Toggle
Protection Set OVP level
UVP level
OCP level
UCP level
OPP level
UPP level
Fold Mode
Read Alarms Read alarm msgs
Store User Setting Select 1 to 10
Recall Factory default
Last setting
User setting
Auto sequence
Auto Sequence Operation (Run/Pause, Trigger, Stop)
MENU Access menu functions
ENTER Make a selection
UP/DOWN Scroll to view selections, increment numerical entries
CE Clear entry
Numeric keypad Enter data
EXIT Cancel operation
Special Key Functions
UP View power readback (from default window)
CE Deletes a selected user setting from memory (Hold for 2 seconds)
EXIT Exit auto sequence
26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Enter OV level
Enter UV level S/D if tripped?
Enter OC level S/D if tripped?
Enter UC level S/D if tripped?
Enter OP level S/D if tripped?
Enter UP level S/D if tripped?
Select fold mode Select fold delay
Select 1 to 10
Select 1 to 10
Select Y or N
Select Y or N
Select Y or N
Select Y or N
Select Y or N
Operating Manual for XDC Series Power Supply