Configuring Global Mode - Zte ZXR10 2920 User Manual

Steps For the configuration of user mode, perform the following steps.
1. When using HyperTerminal mode to log on to system,
system enters into user mode automatically.
Result: The prompt character in the user mode is the host
name followed by ">", as shown below:
zte>
Note: By default host name is zte.
by using the command hostname.
2. In the user mode, execute the command exit to exit the
switch configuration.
3. In the user mode, execute the command show to display
the system configuration and operation information.
Note: The command show can be executed in any mode.
E
ND OF STEPS
User mode has been configured.
Result

Configuring Global Mode

Purpose This topic describes the global configuration mode.
Steps For the configuration of global mode,
steps.
1. In user mode,
corresponding password to enter the global configuration
mode, as follows:
zte>enable
Password:***
zte(cfg)#
2. In the global configuration mode, various functions of the
switch can be configured.
local|radius <name> admin-password [<string>] to set
the password for entering the global configuration mode to
prevent the login of unauthorized users.
Result: This sets the password for entering the global
configuration mode.
3. To return to the user mode from the global configuration
mode, use the exit command.
E
ND OF STEPS
Result Global mode has been configured.
enter the enable command and the
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 Usage and Operation
Modify the host name
perform the following
Use command set user
41