Lacp Configuration - Zte ZXR10 5250 Series Configuration Manual

Gigabit-port intelligent switch
Hide thumbs Also See for ZXR10 5250 Series:
Table of Contents

Advertisement

ZXR10 5250 Series Configuration Guide
Command
show mac (all configuration modes)
show mac running-config (all configuration modes)
show mac all-type {port <1-28>| trunk <1-15>| vlan
<1-4094>} (all configuration modes)
show mac {dynamic | learning | limit | permanent |
static}[port <1-28>| trunk <1-15>| vlan <1-4094>] (all
configuration modes)
show mac mac-address <HH.HH.HH.HH.HH.HH> (all
configuration modes)
show mac unknown-filter [port <1-28>| trunk <1-15>]
(all configuration modes)
show mac aging-time (all configuration modes)
show mac filter (all configuration modes)
show mac logging-alarm (all configuration modes)
zte(cfg)#
|mac-address <HH.HH.HH.HH.HH.HH.HH> mac-mask
<HH.HH.HH.HH.HH.HH.HH>[vlan <1-4094>]}
zte(cfg)#
<trunklist>}session unbind
zte(cfg)#
<trunklist>}session <1-100>{bind|unbind}
show mac learning except session [<1-100>]
show mac learning except {port <portlist>|trunk<trunklis
t>}
show mac protect [portlist]

5.6 LACP Configuration

LACP Overview
The Link Aggregation Control Protocol (LACP) is a standard protocol defined in IEEE
802.3ad.
SJ-20131111172707-002|2013-11-27 (R1.0)
set mac learning except session <1-100>{clear
set mac learning except {port <portlist>| trunk
set mac learning except {port <portlist>| trunk
Function
Displays MAC address entry content.
Displays MAC configuration information.
Displays MAC address entry content
based on port/trunk/VLAN.
Displays various MAC function
configurations and MAC address
entries based on global/port/trunk/VLAN.
Displays the MAC address entry content
of a specified MAC address.
Displays the filter function of the packet
with an unknown source based on
global/port/trunk.
Displays device MAC address aging time.
Displays source MAC address or
destination MAC address filtering function.
Displays MAC event alarm configuration.
Sets the function of not learning specified
MAC addresses
Unbinds ports/trunks and all sessions.
Sets the binding relation between
ports/trunks and all sessions.
Displays the configuration of sessions for
which specified source MAC learning is
not needed.
Displays the binding relation between
ports/trunks and sessions.
Displays the MAC protection state to check
whether MAC protection is triggered.
5-16
ZTE Proprietary and Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents