Show Fiber-Ports Optical-Transceiver - Planet Networking & Communication WGSD-1022 User Manual

Port Length [meters]
------ ---------------------
e1 < 50
e2 Giga link not active
e3 110-140
e4 Fiber

5.14.4 show fiber-ports optical-transceiver

The show fiber-ports optical-transceiver privileged EXEC command displays the optical transceiver
diagnostics.
Syntax
show fiber-ports optical-transceiver [interface] [detailed]
interface — A valid Ethernet port.
Detailed — Detailed diagnostics.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
To test optical transceivers ensure a fiber link is present.
Examples
The following example displays the optical transceiver diagnostics.
console# show fiber-ports optical-transceiver
Port Temp
------ --------
g1 W
g2 OK
Voltage Current
Power
------------ ------------
OK E
OK OK
Output Input
Power Power
----------- ----------
OK OK
OK OK
LOS
---------
OK
OK