Rmon Event; Show Rmon Events - Planet Networking & Communication WGSD-1022 User Manual

5.19.8 rmon event

The rmon event global configuration command configures an event. To remove an event, use the no
form of this command.
Syntax
rmon event index type [community text] [description text] [owner name]
no rmon event index
index — The event index. (Range: 1 - 65535)
type — The type of notification that the device generates about this event. Can have the following
values: none, log, trap, log-trap. In the case of log, an entry is made in the log table for each
event. In the case of trap, an SNMP trap is sent to one or more management stations.
community text — If an SNMP trap is to be sent, it is sent to the SNMP community specified by
this octet string. (Range: 0-127 characters)
description text — A comment describing this event. (Range: 0-127 characters)
owner name — Enter a name that specifies who configured this event. If unspecified, the name is
an empty string. (Range: 0-127 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an event with the trap index of 10
Console (config)# rmon event 10 log

5.19.9 show rmon events

The show rmon events user EXEC command displays the RMON event table.
Syntax
show rmon events
Default Configuration
This command has no default configuration.