4.11.5 Save Configuration
On this screen, you can choose two methods to save the configuration: Via TFTP Upgrade and Via HTTP.
See figure 4-58
The page contains the following fields:
Via TFTP
• Via TFTP Upgrade
• TFTP Server
• Source File
• Destination File
Figure 4-58 Save Configuration via TFTP
Select this option to upgrade the switch from a file located on a TFTP
Server.
The TFTP Server IP Address that contains the source file to upgrade
from.
Specifies the name of the upgrade file on the TFTP Server.
Where specifies the name of the configuration file. The default is
StartupCfg.