Disable; Configure - Planet Networking & Communication WGSD-1022 User Manual

Example
The following example shows how to enter privileged mode:
Console> enable
enter password:
Console#

5.26.2 disable

The disable privileged EXEC command returns to User EXEC mode.
Syntax
disable [privilege-level]
privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 1.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to return to normal mode.
Console# disable
Console>

5.26.3 configure

The configure privileged EXEC command enters the global configuration mode.
Syntax
configure
There are no parameters for this command.
Default Configuration
This command has no default configuration.