Show Bridge Address-Table Static - Planet Networking & Communication WGSD-1022 User Manual

User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console# show bridge address-table
Aging time is 250 sec
vlan
-----
1
1
200

5.4.14 show bridge address-table static

The show bridge address-table static privileged EXEC command displays statically created entries in
the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — Specific valid VLAN, such as VLAN 1.
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
console# show bridge address-table static
Aging time is 300 sec
vlan
mac address
-------------------
0060.704C.73FF
0060.708C.73FF
0010.0D48.37FF
mac address
port type
------ --------
e8 dynamic
e8 dynamic
e8 static
port type