Table of Contents
Advertisement
DSA (DSS) key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP address
SSH username
----------------
----------------
172.16.0.1
John Brown
The following table describes the significant fields shown in the display:
Field
Description
IP address
Client address
SSH username
User name
Version
SSH version number
Cipher
Encryption type (3DES, Blowfish, RC4)
Auth Code
Authentication Code (HMAC-MD5, HMAC-SHA1)
5.22.10 show crypto key mypubkey
The show crypto key mypubkey privileged EXEC command displays the SSH public keys on the
device.
Syntax
show crypto key mypubkey [rsa | dsa]
rsa—RSA key.
dsa—DSA key.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SSH public keys on the device.
Console# show crypto key mypubkey rsa
Version
---------------
2.0 3
Cipher
Auth Code
--------------
-------------------
DES
HMAC-SH1
Advertisement
Table of Contents
