Exit(Configuration); Exit(Exec) - Planet Networking & Communication WGSD-1022 User Manual

5.26.5 exit(configuration)

The exit command exits any configuration mode to the next highest mode in the CLI mode hierarchy.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
All command modes
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface Configuration mode to User EXEC
mode.
Console(config-if)# exit
Console(config)# exit
Console#

5.26.6 exit(EXEC)

The exit user EXEC command closes an active terminal session by logging off the device.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode
User Guidelines
There are no user guidelines for this command.
Example
The following example closes an active terminal session.