Management Access-Class; Show Management Access-List - Planet Networking & Communication WGSD-1022 User Manual

5.13.4 management access-class

The management access-class global configuration command defines which management access-list
is used. To disable restriction, use the no form of this command.
Syntax
management access-class {console-only | name}
no management access-class
name — Name of the access list. If unspecified, defaults to an empty access-list.(Range: Valid
name)
console-only — The device can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access-list called "mlist" as the management access-list.
Console (config)# management access-class mlist

5.13.5 show management access-list

The show management access-list privileged EXEC command displays management access-lists.
Syntax
show management access-list [name]
name — Name of the access list. If unspecified, defaults to an empty access-list.(Range: Valid
name)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode