Bridge Multicast Forward-All; Bridge Multicast Forbidden Forward-All - Planet Networking & Communication WGSD-1022 User Manual

console (config)# interface vlan 8
console (config-if)# bridge multicast forward-unregistered add ethernet 1

5.4.7 bridge multicast forward-all

The bridge multicast forward-all interface configuration command enables forwarding of all multicast
packets on a port. To restore the default, use the no form of the bridge multicast forward-all command.
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel
port-channel-number-list}
no bridge multicast forward-all
add — Adds ports to the group.
remove — Removes ports from the group.
interface-list — Separate non consecutive valid Ethernet ports with a comma and no spaces; a
hyphen is used to designate a range of ports.
port-channel-number-list — Separate non consecutive valid port-channels with a comma and no
spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
Disable forward-all on all ports.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example all multicast packets on port e8 are forwarded.
console (config)# interface vlan 2
console (config-if)# bridge multicast forward-all add ethernet e8

5.4.8 bridge multicast forbidden forward-all

The bridge multicast forbidden forward-all interface configuration command forbids a port to be a
forward-allmulticast port. To restore the default, use the no form of the bridge multicast forward-all