Key-String - Planet Networking & Communication WGSD-1022 User Manual

username — Specifies the remote SSH client username, which can be up to 48 characters long.
rsa — RSA key.
dsa — DSA key.
Default Configuration
By default, there are no keys.
Command Mode
SSH Public Key Chain Configuration mode
User Guidelines
Follow this command with the key-string command to specify the key.
Example
The following example enables a SSH public key to be manually configured for the SSH public key chain
called "bob".
Console(config-pubkey-chain)# user-key bob
Console(config-pubkey-key)# key-string rsa
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl

5.22.8 key-string

The key-string SSH public key-string configuration command manually specifies a SSH public key.
Syntax
key-string text
text — Authentication string that must be sentand received in the packets, using the routing
protocol being authenticated. The string can contain from 1 to 16 uppercase and lowercase
alphanumeric characters.
Default Configuration
By default, the keys do not exist.
Command Mode
SSH Public Key-string configuration
User Guidelines
Use the key-string row command to specify the SSH public key row by row. Each row must begin with
the keystring row command. This command is useful for configuration files.
UU-encoded DER format is the same format in authorized_keys file used by OpenSSH.