Installing The Sfp/Sfp+ Transceiver - Planet Networking & Communication GS-6320 Series User Manual

Step 6: Proceed with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to
the Managed Switch.

2.2.3 Installing the SFP/SFP+ Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Managed Switch, as

Approved PLANET SFP/SFP+ Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP/SFP+ transceivers. The following list of approved
PLANET SFP/SFP+ transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Model Speed (Mbps)
MFB-FX
MFB-F20
MFB-F40
MFB-F60
MFB-F120
MFB-TFX
MFB-TF20
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 2-2-4 shows..
Figure 2-2-4: Plugging in the SFP/SFP+ Transceiver
Connector Interface
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
Fiber Mode Distance
Multi Mode 2km
Single Mode 20km
Single Mode 40km
Single Mode 60km
Single Mode 120km
Multi Mode 2km
Single Mode 20km
39
Wavelength (nm) Operating Temp.
1310nm 0 ~ 60 degrees C
1310nm 0 ~ 60 degrees C
1310nm 0 ~ 60 degrees C
1310nm 0 ~ 60 degrees C
1550nm 0 ~ 60 degrees C
1310nm -40 ~ 75 degrees C
1550nm -40 ~ 75 degrees C