Sntp - Planet Networking & Communication WGSD-1022 User Manual

• Gateway
• DNS Server

4.2.3 SNTP

In the Basic Setup Table, you can see the SNTP (see figure 4-5), by which you can configure the time
settings for the Switch. You can select SNTP Server Time or System Time.
The Time page includes the following fields:
• Use System Time
• Use SNTP Time
• Hours / Minuntes /
Seconds
• Month / Day / Year
Enter the default gateway for the IP interface.
The factory default value is 0.0.0.0
Enter the IP Address of the DNS Server. The Domain Name System
(DNS) converts user-defined domain names into IP addresses
Figure 4-5 SNTP screen
Specifies that the system time is not set by an external source but the
Local time settings
Specifies that the system time is set via an SNTP server
Defines the system time. The field format is HH:MM:SS, for example,
21:15:03.
Defines the system date. The field format is Day:Month:Year, for
example, 04 May 2050