Qos Cos Override; Show Qos Map - Planet Networking & Communication WGSD-1022 User Manual

5.17.11 qos cos override

The qos cos override interface configuration command overrides the CoS of incoming packets. To
disable the override, use the no form of this command.
Syntax
qos cos override
no qos cos override
This command has no arguments or keywords.
Default Configuration
CoS Override is disabled
Command Mode
Interface configuration (Ethernet, Port-Channel).
User Guidelines
This command enables to override the CoS value of tagged packets, with the value configured by the
qos cos command.
Example
The following example overrides the CoS of incoming packets.
Console(config)# qos cos override

5.17.12 show qos map

The show qos map user EXEC command displays all the QoS maps.
Syntax
show qos map [dscp-queue | policed-dscp | dscp-mutation]
dscp-queue — Displays the DSCP to queue map.
policed-dscp — Displays the DSCP to DSCP remark table.
dscp-mutation — Displays the DSCP-DSCP mutation table.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command
User Guidelines
There are no user guidelines for this command.