Interface Vlan - Planet Networking & Communication WGSD-1022 User Manual

Command Modes
Vlan configuration mode
User Guidelines
There are no user guidelines for this command.
Examples1
Console# vlan database
Console(config-vlan)# default-vlan disable

5.27.4 interface vlan

The interface vlan global configuration command enters the interface configuration (VLAN) mode.
Syntax
interface vlan vlan-id
vlan-id — The ID of an existing VLAN (excluding GVRP dynamic VLANs).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the VLAN 1 IP address of 131.108.1.27 and subnet mask
255.255.255.0.
Console (config)# interface vlan 1
Console (config-if)# ip address 131.108.1.27 255.255.255.0