Link Aggregation - Planet Networking & Communication WGSD-1022 User Manual

4.3.2 Link Aggregation

When you enter the Link Aggregation, you can see these parts (see figure 4-8), such as:
LAG, shows whether the port is part of a LAG.
The Link Aggregation page contains the following fields:
• LAG
• Memo
• Administrative
Control
• Type
• Link Status
• Speed
• Duplex Mode
• Flow control
Figure 4-8 Link Aggregation screen
Indicates the number of the LAG interface. Up to eight LAG interface
can be configured.
Indicates the description of the LAG ports
Up indicates that the port is available and down shows administrator
has taken the port offline. You can click the Save Settings option to
save this option.
The port types that comprise the LAG.
Shows an active connection when you choose the UP button, there is
no active connection or the port has been taken offline by an
Admiinistrator when you choose the Down button
Shows the connection speed of the port and the speed can be
configured only when auto-negotiation is disabled on that port
The port duplex mode, Full (transmission occurs in both directions
simultaneously) or Half (transmission occurs in only one direction at a
time). This mode can be configured only when auto-negotiation is
disabled and port speed is set to 10Mbps or 100Mbps.
Shows the flow control status of the port. It is active when the port