Planet Networking & Communication WGSD-1022 User Manual page 120

exit
end
Ctrl+Z
The following example illustrates how to access Global Configuration mode and teturn back to the
Privileged EXEC mode:
console #
console # configure
console(config) # exit
console #
Interface Configuration Mode and Specific Configuration
Modes
Interface Configuration commands are to modify specific interface operations. The following are the
Interface Configuration modes:
Line Interface—Contains commands to configure the management connections. These include
commands such as line speed, timeout settings, etc. The Global Configuration mode command
line is used to enter the line configuration command mode.
VLAN Database—Contains commands to create a VLAN as a whole. The Global Configuration
mode command vlan database is used to enter the VLAN Database Interface Configuration
mode.
Management Access List—Contains commands to define management access-lists. The Global
Configuration mode command management access-list is used to enter the Management
Access List Configuration mode.
Ethernet—Contains commands to manage port configuration. The Global Configuration mode
command interface ethernet enters the Interface Configuration mode to configure an Ethernet
type interface.
Port Channel—Contains commands to configure port-channels, for example, assigning ports to a
VLAN or port-channel. Most of these commands are the same as the commands in the Ethernet
interface mode, and are used to manage the member ports as a single entity. The Global
Configuration mode command interface port-channel is used to enter the port-channel Interface
Configuration mode.
SSH Public Key-chain—Contains commands to manually specify other device SSH public keys.
The Global Configuration mode command crypto key pubkey-chain ssh is used to enter the