Port Jumbo-Frame; Clear Counters - Planet Networking & Communication WGSD-1022 User Manual

5.7.11 port jumbo-frame

The port jumbo-frame global configuration command enables jumbo frames for the device. To disable
jumbo frames, use the no form of this command.
Syntax
port jumbo-frame
no port jumbo-frame
Default Configuration
Jumbo Frames are not enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, Jumbo Frames are enabled on the device.
Console# port jumbo-frame

5.7.12 clear counters

The clear counters user EXEC mode command clears statistics on an interface.
Syntax
clear counters [ethernet interface | port-channel port-channel-number]
Interface — Valid Ethernet port.
port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the counters for interface g1 are cleared.