Vlan Group - Planet Networking & Communication WGSD-1022 User Manual

• Ingress Filtering
• LAG
Port Mode
Access
General
Trunk

4.4.3 VLAN Group

The Ports to VLAN screen contains fields for configuring ports to a VLAN. The port default VLAN ID
(PVID) is configured on the Create VLAN screen. All untagged packets arriving to the device are tagged
by the ports PVID. The Ports to VLAN screen contains a Port Table for VLAN parameters for each port.
Ports are assigned VLAN membership by selecting and configuring the presented configuration options,
you can refer to figure 4-13.
Enables or disables Ingress filtering on the port. Ingress filtering
discards packets which do not include an ingress port
Indicates the LAG to which the VLAN is defined
VLAN Membership
Belongs to a single untagged VLAN
Allowed to belongs to multiple untagged
VLANs at the same time
Allowed to belongs to multiple Tagged
VLANs at the same time
Figure 4-13 Ports to VLAN screen
Frame Leave
Untagged
( Tag=PVID be removed)
Untagged
(Tag=PVID be removed)
Tagged
(Tag=PVID or Original VID be remained)