Port Configuration; Port Settings - Planet Networking & Communication WGSD-1022 User Manual

4.3 Port Configuration

In this field, you can see these parts, such as Port settings, Link aggregation, LACP Config.

4.3.1 Port Settings

To use the port settings screen for setting up each of the Switch's ports. It shows these parts: port#,
memo, admin control, link status, current speed, duplex mode, MDI/MDIX, Flow control, Phy type, LAG,
PVE (see Figure 4-6):
The Port Settings screen contains the following fields:
• Port
• Memo
• Admin Control
• Link Status
• Current Speed
Figure 4-6 Port Settings screen
Shows the port number. You can click on the Detail button of the
appropriate port (G1, G2) to use an SFP module, and the Detail
button shows the Port Configuration Detail screen, which include port,
description, port type, admin status, current port status ......
Click up the Detail button to make a brief description of the port
When to choose the UP button, the port can be accessed normally, to
choose the Down button, the port will be taken offline
Shows an active connection when you choose the UP button, there is
no active connection or the port has been taken offline by an
Admiinistrator when you choose the Down button
Shows the connection speed of the port and the speed can be