Table of Contents
Advertisement
Default Configuration
The local user database is checked. This has the same effect as the command aaa authentication login
listname local.
Note: On the console, login succeeds without any authentication check if the authentication method is
not defined.
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the aaa authentication login command are used with
the login authentication command.
Create a list by entering the aaa authentication login list-name method command for a particular
protocol, where list-name is any character string used to name this list. The method argument identifies
the list of methods that the authentication algorithm tries, in the given sequence.
The additional methods of authentication are used only if the previous method returns an error, not if it
fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the
final method in the command line.
Example
The following example configures authentication login.
console (config) # aaa authentication login default radius local enable none
5.3.2 aaa authentication enable
The aaa authentication enable global configuration command defines authentication method lists for
accessing higher privilege levels. To return to the default configuration use the no form of this command.
Syntax
aaa authentication enable {default | list-name} method1 [method2...]
no aaa authentication enable default
default — Uses the listed authentication methods that follow this argument as the default list of
methods,when using higher privilege levels.
list-name — Character string used to name the list of authentication methods activated, when
using accesshigher privilege levels.
method1 [method2...]—Specify at least one from the following table:
Advertisement
Table of Contents
