Planet Networking & Communication WGSD-1022 User Manual page 58

The page contains the following fields:
• Instance ID
• Included VLAN
• Bridge Priority
• Designated Root
Bridge ID
• Root Port
• Root Path Cost
• Bridge ID
• Remaining Hops
Press the VLAN Instance Configuration button, a new window popup. Assgin selected VLAN to specify
MST Instance at the VLAN Instatnce Configuration page. The screen in Figure 4-21 appears.
Defines the VLAN group to which the interface is assigned.
Where maps the selected VLAN to the selected instance. Each VLAN
belongs to one instance.
Specifies the selected spanning tree instance device priority. The field
range is 0-61440.
which indicates the ID of the bridge with the lowest path cost to the
instance ID
Where indicates the selected instance's root port
Indicates the selected instance's path cost.
Indicates the bridge ID of the selected instance.
Indicates the number of hops remaining to the next destination.
Figure 4-21 MSTP VLAN Instance Configuration screen