The page contains the following fields:
• Mirrored Port
• Type
4.11.4 Firmware Upgrade
The Firmware Upgrade screen contains the following fields:
Defines the port to which traffic is mirrored.
Indicates the port mode configuration for port mirroring. The possible
field values are:
• RxOnly, defines the port mirroring on receiving ports. This is the
default value.
• TxOnly, defines the port mirroring on transmitting ports.
• Both, which defines the port mirroring on both receiving and
transmitting ports. Target Port, defines the port from which traffic
is mirrored.
Figure 4-56 Firmware Upgrade via TFTP