Show Users - Planet Networking & Communication WGSD-1022 User Manual

name — The device host name.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the device host name.
Console (config)# hostname abc

5.23.7 show users

The show users user EXEC command displays information about the active users.
Syntax
show users
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users.
Console# show users
Username
----------------
Bob
John
Robert
Protocol
------------
Serial
SSH
HTTP
Location
------------
172.16.0.1
172.16.0.8