Vlan; Default-Vlan Disable - Planet Networking & Communication WGSD-1022 User Manual

5.27.2 vlan

Use the vlan interface configuration (VLAN) command to create a VLAN. To delete a VLAN, use the no
form of this command.
Syntax
vlan {vlan-range}
no vlan {vlan-range}
vlan-range — A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN IDs
separated by commas (without spaces); use a hyphen to designate a range of IDs. (Range: 2 -
4063)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
Console (config)# vlan database
Console (config-vlan)# vlan 1972

5.27.3 default-vlan disable

The default-vlan disable VLAN configuration command disables the default VLAN functionality. Use the
no form of this command to enable the default VLAN functionality.
Syntax
default-vlan disable
no default-vlan disable
This command has no keywords or arguments.
Default Configuration
Enabled