Show Copper-Ports Cable-Length - Planet Networking & Communication WGSD-1022 User Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the last TDR (Time Domain Reflectometry) tests on all ports.
Console# show copper-ports tdr
Port Result
------- -----------
e1 OK
e2 Short
e3 Test has not been preformed
e4 Short
e5 Fiber

5.14.3 show copper-ports cable-length

The show copper-ports cable-length privileged EXEC command displays the estimated copper cable
length attached to a port.
Syntax
show copper-ports cable-length [interface]
interface — A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This feature works only on 1-Gbps ports.
Example
The following example displays the estimated copper cable length attached to all ports.
Console# show copper-ports cable-length
Length Date
[meters]
-------------- ---------
50 13:32:00 23 July 2003
128 13:32:00 23 July 2003
- -