Show Bridge Address-Table Count; Show Bridge Multicast Address-Table - Planet Networking & Communication WGSD-1022 User Manual

------
1
1
200

5.4.15 show bridge address-table count

The show bridge address-table count privileged EXEC command displays the number of addresses
present in all VLANs or at a specific VLAN.
Syntax
show bridge address-table count [vlan vlan]
vlan — Specific VLAN.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the number of addresses present in the VLANs are displayed.
console# show bridge address-table count
Capacity: 8192
Free: 8084
Used: 108
Secure: 0
Dynamic addresses: 97
Static addresses: 2
Internal addresses: 9
vlan Dynamic
------ --------------
1 75
19 22

5.4.16 show bridge multicast address-table

The show bridge multicast address-table privileged EXEC command displays multicast MAC address
table information.
--------------------
0060.704C.73FF
0060.708C.73FF
0010.0D48.37FF
Static
---------
------
e8
e8
e8
1
1
-------
permanent
delete-on-timeout
delete-on-reset