Interface Range Vlan; Name - Planet Networking & Communication WGSD-1022 User Manual

5.27.5 interface range vlan

The interface range vlan global configuration command enters the interface configuration mode to
configure multiple VLANs.
Syntax
interface range vlan {vlan-range | all}
vlan-range — A list of valid VLAN IDs to add. Separate non consecutive VLAN IDs with a comma
and no spaces; a hyphen designates a range of IDs.
all — All existing static VLANs.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each interface in the range.
If the command returns an error on one of the interfaces, an error message is displayed and execution
continues on other interfaces.
Example
The following example groups VLAN 221 until 228 and VLAN 889 to receive the same command.
Console (config)# interface range vlan 221-228,889
Console (config-if)#

5.27.6 name

The name interface configuration command adds a name to a VLAN. To remove the VLAN name use the
no form of this command.
Syntax
name string
no name
string — Unique name, up to 32 characters in length, to be associated with this VLAN.
Default Configuration
No name is defined.