Layer2 Based Acl - Planet Networking & Communication WGSD-1022 User Manual

4.8.2 Layer2 Based ACL

The Layer2 Based ACL screen (see figure 4-38) allows a MAC based ACL to be defined. ACEs can be
added only if the ACL is not bound to an interface.
The Page contains the following fields:
• ACL Name
• New ACL Name
• Delete ACL
• Action
• Source MAC
Address
• Wildcard Mask
Figure 4-38 Layer2-Base ACL screen
Displays the user-defined MAC based ACLs
Specifies a new user-defined MAC based ACL name.
By which deletes the selected ACL
Indicates the ACL forwarding action. Possible field values are:
• Permit, by which forwards packets which meet the ACL criteria.
• Deny, drops packets which meet the ACL criteria.
• Shutdown, where drops packet that meet the ACL criteria, and
disables the port to which the packet was addressed.
Matches the source MAC address to which packets are addressed to
the ACE.
Defines the source IP address wildcard mask. Wildcard masks
specify which bits are used and ignored.
A wild card mask of 255.255.255.255 indicates that no bit is