Planet Networking & Communication WGSD-1022 User Manual page 113

• Drop Events
• Received Bytes
(Octets)
• Received Packets
• Broadcast Packets
Received
• Multicast Packets
Received
• CRC & Align Errors which displays the number of CRC and Align errors that have
• Undersize Packets
• Oversize Packets
• Fragments
• Jabbers
• Collisions
• Frames of xx Bytes Number of xx-byte frames received on the interface since the device
every 60 seconds.
which displays the number of dropped events that have occurred on
the interface since the device was last refreshed
Displays the number of octets received on the interface since the
device was last refreshed. This number includes bad packets and
FCS octets, but excludes framing bits
Displays the number of packets received on the interface, including
bad packets, Multicast and broadcast packets, since the device was
last refreshed
Which displays the number of good broadcast packets received on
the interface since the device was last refreshed. This number does
not include Multicast packets
Displays the number of good Multicast packets received on the
interface since the device was last refreshed
occurred on the interface since the device was last refreshed
Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed
Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
Indicates the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the
interface since the device was last refreshed
Indicates the total number of received packets that were longer than
1518 octets. This number excludes frame bits, but includes FCS
octets that had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a
non-integral octet (Alignment Error) number. The field range to detect
jabbers is between 20 ms and 150 ms
Displays the number of collisions received on the interface since the
device was last refreshed
was last refreshed.
Clear Counters button, this option will reset all of the statistic counts.
Refresh Now button, which use this option to refresh the statistics.