Planet Networking & Communication WGSD-1022 User Manual page 85

• Number of Retries
• Timeout for Reply
• Dead Time
• Key String
• Source IP Address
• Usage Type
Add to Table
Use the
bottom of the screen.
The authenticated port default is 1812
Defines the number of transmitted requests sent to RADIUS server
before a failure occurs. The possible field values are 1 - 10.
Three is the default value.
This defines the amount of the time in seconds the device waits for an
answer from the RADIUS server before retrying the query, or
switching to the next server.
The possible field values are 1 - 30.
Three is the default value.
This defines the amount of time (minutes) that a RADIUS server is
bypassed for service requests. The range is 0-2000.
The Dead Time default is 0 minutes.
This defines the default key string used for authenticating and
encrypting all RADIUS communications between the device and the
RADIUS server.
This key must match the RADIUS encryption.
Defines the source IP address that is used for communication with
RADIUS servers.
Specifies the RADIUS server authentication type. The default value is
Login. The possible field values are:
• Login, indicates that the RADIUS server is used for
authenticating user name and passwords.
• 802.1X, indicates that the RADIUS server is used for 802.1X
authentication.
• All, where indicates that the RADIUS server is used for
authenticating user name and passwords, and 802.1X port
authentication.
button when you add the RADIUS configuration to the RADIUS Table at the