Show Interfaces Description - Planet Networking & Communication WGSD-1022 User Manual

Speed—Refers to the port speed.
Neg—Describes the Auto-negotiation status.
Flow Control—Displays the Flow Control status.
Back Pressure—Displays the Back Pressure status.
Link State—Displays the Link Aggregation status.

5.7.16 show interfaces description

The show interfaces description user EXEC command displays the description for all configured
interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number|
out-of-band--eth oobinterface]
Interface — Valid Ethernet port.
port-channel-number — A valid port-channel trunk index.
oob-interface — Out-of-band Ethernet port number.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the description for the interface g1.
Console# show interfaces description ethernet g1
Port Description
------ --------------------
e1 Management_port
e2 R&D_port
e3 Finance_port
Ch Description