Show Gvrp Configuration - Planet Networking & Communication WGSD-1022 User Manual

5.8.7 show gvrp configuration

The show gvrp configuration User EXEC command displays GVRP configuration information, including
timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface | port-channel port-channel-number]
interface — A valid Ethernet interface.
port-channel-number — A valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to display GVRP configuration information:
Console# show gvrp configuration
GVRP Feature is currently enabled on the switch.
Maximum VLANs: 255,
Port(s) GVRP
Status
-------- -------------
e1 Enabled
e4 Enabled
Registration Dynamic
VLAN
---------------- ---------------
Normal Enabled
Normal Enabled
Timers Leave
(milliseconds)
Creation
--------------------- ---------------- -------------
200 600
200 600
Leave
All
Join
10000
10000