Show Ports Storm-Control; Gvrp Commands; Gvrp Enable (Global) - Planet Networking & Communication WGSD-1022 User Manual

5.7.21 show ports storm-control

The show ports storm-control privileged EXEC command displays the storm control configuration.
Syntax
show ports storm-control [ethernet interface]
ethernet interface—A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
Console# show ports storm-control
Port
-----
e1
e2
e3

5.8 GVRP Commands

5.8.1 gvrp enable (global)

GVRP, or GARP VLAN Registration Protocol, is an industry-standard protocol designed to propagate
VLAN information from device to device. With GVRP, a single switch is manually configured with all
desired VLANs for the network, and all other switches on the network learn these VLANs dynamically.
The gvrp enable global configuration command enables GVRP globally. To disable GVRP globally on
the switch, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Broadcast Storm control [kbyes/sec]
-------------------------------------------------
8000
Disabled
Disabled