Product Description - Planet Networking & Communication IGS-6325 Series User Manual

L3 industrial managed ethernet switch
Table of Contents

Advertisement

User's Manual of IGS-6325 series

1.2 Product Description

PLANET IGS-6325-20T4C4X is an Industrial Layer 3 Managed Switch that features 24 10/100/1000Mbps ports, 4 shared SFP
ports and 4 10G SFP+ ports, and supports Layer 3 IP routing in a 1U case. With 10Gbps uplink, the IGS-6325-20T4C4X can
handle extremely large amounts of data in a secure topology linking to an industrial backbone or high capacity servers. The
IGS-6325-20T4C4X is capable of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps in the
temperature range from -40 to 75 degrees C. It greatly simplifies the tasks of upgrading the industrial LAN for catering to
increasing bandwidth demands. Furthermore, it adopts user-friendly "Front Access" design for easy wiring and maintenance of
the IGS-6325-20T4C4X when placed in the cabinet.
Layer 3 Routing Support
The IGS-6325-20T4C4X enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6
VLAN static routing manually, and the IPv4 OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior
dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by
exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based
on that database.
Cybersecurity Network Solution to Minimize Security Risks
The cybersecurity feature included to protect the switch management in a mission-critical network virtually needs no effort and
cost to install. For efficient management, the IGS-6325-20T4C4X is equipped with console, web and SNMP management
interfaces. With the built-in web-based management interface, the IGS-6325-20T4C4X offers an easy-to-use, platform
independent management and configuration facility. The IGS-6325-20T4C4X supports SNMP and it can be managed via any
management software based on the standard SNMP protocol. For reducing product learning time, the IGS-6325-20T4C4X
offers Cisco-like command via Telnet or console port and customer doesn't need to learn new command from these switches.
Moreover, the IGS-6325-20T4C4X offers remote secure management by supporting SSH, SSL and SNMP v3 connection which
can encrypt the packet content at each session.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-6325-20s4c4xIgs-6325-20t4c4x

Table of Contents