Interfaces Configuration - Planet Networking & Communication GS-6320 Series User Manual

• Auto/Specific
• Cost
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.4.8.5 Interfaces Configuration

This is interface configuration parameter table.
The displayed settings are:
Object
• Interface
• Priority
• Passive Interface
• Cost
• Hello Interval
• Dead Interval
• Retransmit Interval
User's Manual of GS-6320 and MGS-6320 Managed Switches
other areas.
When 'Auto' is selected, the cost value is set to 0 automatically and isn't allowed
to be configured.
User specified cost (or metric) for this summary route. It is allowed to be
configured only when 'Specific' is selected. The allowed range is 0 to 16777215
and the default setting is 'auto cost' mode.
Description
Interface identification.
User specified router priority for the interface. The allowed range is 0 to 255 and
the default value is 1.
Indicates whether the interface is passive or not
User specified cost for this interface. It's link state metric for the interface. The
field is significant only when 'IsSpecificCost' is TRUE. The allowed range is 1 to
65535 and the default setting is 'auto cost' mode.
How many Hello packets will be sent per second. The allowed range is 1 to
65535 and the default value is 10 (seconds).
The time interval (in seconds) between hello packets. The allowed range is 1 to
65535 and the default value is 40 (seconds).
The time interval (in seconds) between link-state advertisement(LSA)
retransmissions for adjacencies. The allowed range is 3 to 65535 and the default
value is 5 (seconds).
283
Buttons
Click to
add new
entry.