Table of Contents
Advertisement
Appendix C. FAST ACTIVATION
C.1
Introduction
FAST is an enhancement feature available in Comtech EF Data products, enabling on-
location upgrade of the operating feature set—in the rack—without removing a modem
from the setup. This accelerated upgrade can be accomplished only because of FAST's
extensive use of programmable devices incorporating Comtech EF Data-proprietary
signal processing techniques. These techniques allow the use of a unique access code to
enable configuration of the available hardware. The access code can be purchased at any
time from Comtech EF Data. Once obtained, the access code is loaded into the unit
through the front panel keyboard.
C.2
Activation Procedure
C.2.1
Serial Number
Obtain the Modem serial number as follows:
a. From the main menu, select FAST, then [ENTER].
b. The Modem motherboard Serial Number is displayed on the bottom line, to
the left.
c. Record serial number:
PROCEDURE
C–1
Advertisement
Table of Contents
