Table of Contents
Advertisement
CDM-710G High-Speed Satellite Modem
Web Server Interface
7.3.2.2
Admin | Remote
Use the 'Admin | Remote' page (Figure 7-5) to set and return administration information for the
CDM-710G Simple Network Management Protocol (SNMP) feature.
The Administrator can assign up to two SNMP Trap IP addresses.
The Administrator can assign a SNMP Trap Community String. The factory default for this
parameter is public. The SNMP Trap Community String field can be any combination of characters
and a length of 0 - 20 characters.
For details pertaining to the configuration parameters available on this page, refer to Chapter 6.
FRONT PANEL OPERATION and Chapter 8. SNMP INTERFACE.
Once the desired configuration settings have been made on this page, click [Submit Admin] to
save these changes.
Figure 7-5. Admin | Remote page
7–9
Revision 1
MN-CDM710G
Advertisement
Table of Contents
Need help?
Do you have a question about the CDM-710G and is the answer not in the manual?
Questions and answers