HP PROCURVE 6208M-SX Installation And Getting Started Manual Page 112

Hewlett-packard switch user manual.
Hide thumbs
Viewing SSH Connection Information
Up to five SSH connections can be active on the HP device. To display information about SSH connections, enter
the following command:
HP9300#show ip ssh
Connection
Version
1
2
3
4
5
Syntax: show ip ssh
This display shows the following information about the active SSH connections:.
This Field...
Connection
Version
Encryption
State
Username
The show who command also displays information about SSH connections. For example:
HP9300#show who
Console connections:
established, active
Telnet connections:
Encryption
1.5
ARCFOUR
1.5
IDEA
1.5
3DES
1.5
none
1.5
none
Table 4.1: SSH Connection Information
Displays...
The SSH connection ID.
The SSH version number. This should always be 1.5.
The encryption method used for the connection. This can be IDEA,
ARCFOUR, DES, 3DES, or BLOWFISH.
The connection state. This can be one of the following:
0x00
Server started to send version number to client.
0x01
Server sent version number to client.
0x02
Server received version number from client.
0x20
Server sent public key to client.
0x21
Server is waiting for client's session key.
0x22
Server received session key from client.
0x23
Server is verifying client's session key.
0x24
Client's session key is verified.
0x25
Server received client's name.
0x40
Server is authenticating client.
0x41
Server is continuing to authenticate client after one or more
failed attempts.
0x80
Server main loop started after successful authentication.
0x81
Server main loop sent a message to client.
0x82
Server main loop received a message from client.
The user name for the connection.
State
Username
0x82
neville
0x82
lynval
0x82
terry
0x00
0x00
T
his can be from 1 – 5.
Configuring Secure Shell
4 - 7

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: