HP PROCURVE 6208M-SX Installation And Getting Started Manual: Rfc Support

Hewlett-packard switch user manual.
Hide thumbs
Installation and Getting Started Guide

RFC Support

The following table lists the RFCs supported by the HP 9304M, HP 9308M, and HP 6208M-SX routing switches
and the HP 6208M-SX switch.
NOTE: Some devices support only a subset of the RFCs. For example, the HP 6208M-SX switch does not
support router-specific RFCs.
RFC Number
768
User Datagram Protocol (UDP)
783
Trivial File Transfer Protocol (TFTP)
791
Internet Protocol (IP)
792
Internet Control Message Protocol (ICMP)
793
Transmission Control Protocol (TCP)
826
Ethernet Address Resolution Protocol (ARP)
854, 855, and
Telnet
857
894
IP over Ethernet frames
903
Reverse ARP (RARP)
906
Bootstrap loading using TFTP
919
Broadcast Internet datagrams
920
Domain requirements
922
Broadcast Internet datagrams in the presence of subnets
950
Internet standard subnetting procedure
951
Bootstrap Protocol (BootP)
1027
Proxy ARP
1042
IP datagrams over IEEE 802 networks (for Ethernet)
1058
Route Information Protocol (RIP) version 1
1075
IP Multicast
1112
Internet Gateway Management Protocol (IGMP)
1122 and
Requirements for Internet hosts (routers)
1123
1141
Incremental updating of the Internet checksum
1155
Structure and Identification of Management Information (SMI)
1157
Simple Network Management Protocol (SNMP) version 1
1212
Concise MIB Definitions
B - 2
Table B.1: RFC Support
Protocol or Standard

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: