Installation and Getting Started Guide
Figure 2.7
Installing an HP 9304M routing switch in a rack mount
Rack Mount Installation – HP 6208M-SX or HP 6308M-SX
NOTE: You need a #2 Phillips-head screwdriver for installation.
1.
Remove the rack mount kit from the shipping carton. The kit contains two L-shaped mounting brackets and
mounting screws.
2.
Attach the mounting brackets to the sides of the device as illustrated in Step 2 of Figure 2.8.
3.
Attach the device in the rack as illustrated in Step 3 of Figure 2.8.
4.
Proceed to "Connecting Power to the Device" below.
Figure 2.8
Installing an HP 6208M-SX or HP 6308M-SX in a rack mount
2 - 16
4
3
2
1
Lin k
Ac tiv ity
r
Po we
8
Lin k
Ac tiv ity
7
6
5