HP PROCURVE 6208M-SX Installation And Getting Started Manual page 55

Hewlett-packard switch user manual
Hide thumbs Also See for PROCURVE 6208M-SX:
Table of Contents

Advertisement

Installation and Getting Started Guide
USING THE WEB MANAGEMENT INTERFACE�
To configure a chassis slot for a module:
1.
Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2.
Click on the Module link to display the Module panel, as shown in the following example.
3.
Click the Add Module link to display the following panel.
4.
Select slot number from the Slot pulldown menu.
Slots on the HP 9304M are numbered 1 – 4, from top to bottom.
Slots on the HP 9308M are numbered 1 – 8, from left to right.
5.
Select the module type from the Module Type pulldown menu.
6.
Click the Add button to save the change to the device's running-config file.
7.
Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device's flash memory.
2 - 28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 1600m

Table of Contents