Displaying And Maintaining Ssh; Establishing A Connection Between The Ssh Client And The Server - HP 4800G Series Configuration Manual

To do...
Disable first-time authentication
support
Configure the server public key
Specify the host public key
name of the server

Establishing a Connection Between the SSH Client and the Server

Follow these steps to establish the connection between the SSH client and the server:
To do...
Establish a
connection
between the SSH
client and server,
and specify the
public key
algorithm, preferred
encryption
algorithms,
preferred HMAC
algorithms and
preferred key
exchange algorithm

Displaying and Maintaining SSH

To do...
Display the source IP address
or interface currently set for the
SFTP client
Display the source IP address
or interface currently set for the
SSH client
Display SSH server status
information or session
information on an SSH server
Display the mappings between
SSH servers and their host
public keys saved on an SSH
client
Use the command...
undo ssh client first-time
Refer to Configuring a Client
Public Key
ssh client authentication
server server assign
publickey keyname
ssh2 server [ port-number ] [ identity-key { dsa
| rsa } | prefer-ctos-cipher { aes128 | des } |
For an prefer-ctos-hmac { md5 | md5-96 | sha1 |
IPv4 sha1-96 } | prefer-kex { dh-group-exchange |
server dh-group1 | dh-group14 } | prefer-stoc-cipher
{ aes128 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
ssh2 ipv6 server [ port-number ] [ identity-key
{ dsa | rsa } | prefer-ctos-cipher { aes128 |
des } | prefer-ctos-hmac { md5 | md5-96 |
For an
sha1 | sha1-96 } | prefer-kex
IPv4 IPv6
{ dh-group-exchange | dh-group1 |
server
dh-group14 } | prefer-stoc-cipher { aes128 |
des } | prefer-stoc-hmac { md5 | md5-96 |
sha1 | sha1-96 } ] *
Use the command...
display sftp client source
display ssh client source
display ssh server { status |
session }
display ssh server-info
1-11
Optional
By default, first-time
authentication is supported on
a client.
Required
The method of configuring
server public key on the client is
similar to that of configuring
client public key on the server.
Required
Use the command...
Available in any view
Available in any view
Available in any view
Available in any view
Remarks
Remarks
Required
Use either
command in
user view.
Remarks