HP PROCURVE 6208M-SX Installation And Getting Started Manual page 182

Hewlett-packard switch user manual
Hide thumbs Also See for PROCURVE 6208M-SX:
Table of Contents

Advertisement

The Chassis devices, the HP 9304M and HP 9308M, come standard with four fans. The HP 9304M also comes
standard with four fans. The HP 9308M comes standard with six fans.
LEDs
Each device is equipped with LEDs that denote port and power supply status. The tables below reflect the
different port and expansion module port states.
Fixed-Port Devices
The HP 9304M and HP 9308M devices come equipped with three LEDs per Ethernet port, as highlighted in Table
8.8.1 below. Gigabit Ethernet ports have two LED indicators, as defined in Table 8.8.2.
Table 8.1: Port LED indicators for a Fixed-port 10BaseT/100BaseTX system
LED
Position
FDX/HDX
Top
100
Middle
Link/Act
Bottom
Chassis Devices
Chassis devices support two different modules with two different LED indicator types, Ethernet/Fast Ethernet and
Gigabit Ethernet. Ethernet modules have two port LED indicators, as defined in Table 8.8.2. LEDs for Gigabit
Ethernet ports are defined in Table 8.8.3.
Table 8.2: Port LED indicators for 100BaseFX, 1000BaseSX/LX, and 1000BaseT ports
LED
Position
Link
Top
Activity
Bottom
State
Meaning
On
The port is operating at full-duplex.
Off
The port is operating at half-duplex.
On
The port is operating at 100 Mbps.
Off
The port is not operating at 100 Mbps.
On
Port is connected.
Off
No port connection exists.
Blinking
Traffic is being transmitted or received on
that port.
State
Meaning
On
Port is connected.
Off
No port connection exists.
On
Traffic is being transmitted and received
on that port.
Off
No traffic is being transmitted.
Blinking
Traffic is being transmitted and received
on that port.
Hardware Overview
8 - 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 1600m

Table of Contents