HP PROCURVE 6208M-SX Installation And Getting Started Manual Page 101

Hewlett-packard switch user manual.
Hide thumbs
Installation and Getting Started Guide
27. To send an Accounting Start packet to the RADIUS accounting server when an authenticated user
establishes a Telnet or SSH session on the HP device, and an Accounting Stop packet when the user logs
out, select Exec from the Type field's pulldown menu.
28. To configure RADIUS accounting for CLI commands, select Commands from the Type field's pulldown menu
and select a privilege level by clicking on one of the following radio buttons:
0 – Records commands available at the Super User level (all commands)
4 – Records commands available at the Port Configuration level (port-config and read-only commands)
5 – Records commands available at the Read Only level (read-only commands)
29. To configure RADIUS accounting to record when system events occur on the HP device, select System from
the Type field's pulldown menu.
30. Click on the radio button next to Radius.
31. Click the Add button to save the change to the device's running-config file.
The accounting method you selected are displayed in the table at the top of the dialog. Each time you add an
accounting method for a given access type, the software assigns a sequence number to the entry. When
accounting is performed, the software tries the accounting sources in ascending sequence order until the
request is either approved or denied. Each time you add an entry for a given access type, the software
increments the sequence number. Thus, if you want to use multiple accounting methods, make sure you
enter the primary accounting method first, the secondary accounting method second, and so on.
If you need to delete an entry, select the access type and accounting method for the entry, then click Delete.
32. Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device's flash memory.
Configuring Authentication-Method Lists
To implement one or more authentication methods for securing access to the device, you configure authentication­
method lists that set the order in which the authentication methods are consulted.
In an authentication-method list, you specify the access method (Telnet, Web, SNMP, and so on) and the order in
which the device tries one or more of the following authentication methods:
Local Telnet login password
Local password for the Super User privilege level
Local user accounts configured on the device
Database on a TACACS or TACACS+ server
3 - 44

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: