HP PROCURVE 6208M-SX Installation And Getting Started Manual Page 150

Hewlett-packard switch user manual.
Hide thumbs
NOTE: You can access the version information whether you have read-write ("set") or read-only ("get") access.
Feature List
Table 7.2 on page 7-3 lists the major software features available in the types of flash software listed in Table 7.1
on page 7-1. Some features are supported only in certain flash software. For each feature, the table indicates the
types of flash code in which the feature is supported. Table 7.2 on page 7-3 uses the following labels to indicate
the flash code types:
routing switch – A device capable of performing Layer 2, Layer 3, and Layer 4 switching and Layer 3
routing. The following HP devices are or can be configured as routing switches:
HP 9308M
HP 9304M
HP 6308M-SX
switch – A device capable of performing Layer 2 switching. The following HP device is configured as a
switch:
HP 6308M-SX
NOTE: Some features are supported only on specific products. Footnotes at the end of the table list any
exceptions.
Some features require specific hardware configurations. See the chapters describing those features or contact
Hewlett-Packard or your reseller for information.
Feature
Access and Management Features
Secure Shell (SSH)
Command-line and web-based management interfaces
Simple Network Management Protocol (SNMP)-based management
application
Multiple levels of access control
TACACS/TACACS+ authentication, authorization, and accounting
RADIUS authentication
Access Control Lists (ACLs)
Protection Against Denial of Service (DoS) Attacks
Dynamic configuration
Soft reboot (reboot flash image without resetting the system)
Scheduled system reload
Table 7.2: HP Software Features
Software Overview
Supported on...
See page...
Routing
Switch
switch
X
X
7-6
X
X
7-7
X
X
7
X
X
7-9
X
X
7-9
X
X
7-10
X
X
7-10
X
X
7-10
X
X
7-10
X
X
7-10
X
X
7-10
-7
7 - 3

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: