HP PROCURVE 6208M-SX Installation And Getting Started Manual: Configuring Cli Banners

Hewlett-packard switch user manual.
Hide thumbs
Configuring Basic Features
To limit the number of broadcast packets sent on port 1/3 to 80,000, enter the following commands:
HP9300(config)# int ethernet 1/3
HP9300(config-if-1/3)# broadcast limit 80000
HP9300(config-if-1/3)# write memory
USING THE WEB MANAGEMENT INTERFACE
You cannot perform this procedure using the Web management interface.
Limiting Multicasts
To limit the number of multicast packets an HP device can forward each second, use the following CLI method.
USING THE CLI
To globally limit the number of multicast packets an HP 9304M or HP 9308M routing switch forwards to 120,000
per second, enter the following command at the global CONFIG level of the CLI:
HP9300(config)# multicast limit 120000
HP9300(config)# write memory
To limit the number of multicast packets sent on port 3/6 to 55,000, enter the following commands:
HP9300(config)# int ethernet 3/6
HP9300(config-if-3/6)# multicast limit 55000
HP9300(config-if-3/6)# write memory
USING THE WEB MANAGEMENT INTERFACE
You cannot perform this procedure using the Web management interface.
Limiting Unknown Unicasts
To limit the number unknown unicast packets an HP device can forward each second, use the following CLI
method.
USING THE CLI
To globally limit the number of unknown unicast packets an HP 9304M or HP 9308M routing switch forwards to
110,000 per second, enter the following command at the global CONFIG level of the CLI:
HP9300(config)# unknown-unicast limit 110000
HP9300(config)# write memory
To limit the number of unknown unicast packets sent on port 4/2 to 40,000, enter the following commands:
HP9300(config)# int ethernet 4/2
HP9300(config-if-4/2)# unknown-unicast limit 40000
HP9300(config-if-4/2)# write memory
USING THE WEB MANAGEMENT INTERFACE
You cannot perform this procedure using the Web management interface.

Configuring CLI Banners

HP devices can be configured to display a greeting message on users' terminals when they enter the Privileged
EXEC CLI level or access the device through Telnet. In addition, an HP device can display a message on the
Console when an incoming Telnet CLI session is detected.
9 - 21

Advertising

   Related Manuals for HP PROCURVE 6208M-SX

Comments to this Manuals

Symbols: 0
Latest comments: